top of page
Wave

EN8 | EN8D | EN8M 
 En 8 Carbon Steel | Heat Treated bars of En8 | EN8 Round Bar supplier | EN8 Bright Bars | EN8 Forged Round Bar Suppliers | EN 8 Blocks | EN 8 Billets | EN8 Square Bars | EN8 Hex Bars | EN8 Flat bar | EN8 Sheets and Plates 

National Steel Industries is one of the most prominent suppliers of EN8 Round Bars. Premium Quality EN8 Forged Bars supplied. Forging of the material can be done as per the customer's requirement. EN8 Bright Bars can be supplied in cold forged condition.  It is used to make chains, screws, gears, arms, rollers, and other machine parts. EN8 applications are in the fields of Shipbuilding, Aircraft Industry, Mechanical Engineering, Oil Industry, Iron and Steel Industry, etc. EN8 QT Round bars are also provided of superior quality at the best price. The EN8 datasheet and tempering curve shows that the material can be provided in quenched, tempered, annealed, carburized, hardened, or any other condition as required by our clients. EN8 Sheets and Plates which are stronger than mild steel are suitable for industrial purposes.

​EN8 | EN8D | EN8M  En 8 Carbon Steel | Heat Treated bars of En8 | EN8 Round Bar supplier | EN8 Bright Bars | EN8 Forged Round Bar Suppliers | EN 8 Blocks | EN 8 Billets | EN8 Square Bars | EN8 Hex Bars | EN8 Flat bar | EN8 Sheets and Plates | 

EN8 material properties are high tensile strength and hardness. We supply EN8 Flat Bars and Forged Circles which have superior strength. EN8 has good machinability and weldability and hence it is used to make many machine parts. EN8 comes under European standards of steel grade. EN8 can be made hard by supplying in EN8 Q condition. EN8 steel rods are one the most popular products of National Steel Industries.

​

Mentioned Below are EN8 Chemical Composition and EN8 Mechanical Properties:

EN8 Chemical Composition

The Chemical Composition of EN 8 contains a carbon content of 0.36 - 0.44 %. The material has an Mn content of 0.60-1.00 % . The contents of P are reduced to 0.05 % and S is reduced to 0.05 % max as excess content of P and S can damage the quality of steel and can cause the alloys steel to break at low stresses. 

​

Chemical Composition of EN8

​

EN8 
C%:     0.35-0.45 
Mn%:   0.60-1.00 
Si%:     0.05-0.35 
S%:      0.06 max
P%:      0.06 max

EN8C 
C%:      0.38-0.43 
Mn%:    0.70-0.90 
Si%:      0.05-0.35 
S%:       0.06 max
P%:        0.06 max

EN8K 
C%:      0.35-0.45 
Mn%:    0.60-1.00 
Si%:      0.05-0.35 
S%:       0.05 max
P%:       0.05 max

EN8BM 
C%:       0.35-0.40 
Mn%:     0.90-1.30 
Si%:       0.25 max
S%:        0.12-0.20 
P%:        0.06 max 

EN8A 
C%:       0.33-0.38 
Mn%:     0.70-0.90 
Si%:       0.05-0.35 
S%:        0.06 max
P%:        0.06 max

EN8D 
C%:      0.40-0.45 
Mn%:    0.70-0.90 
Si%:      0.05-0.35 
S%:       0.06 max
P%:       0.06 max

EN8M 
C%:      0.35-0.45 
Mn%:    1.00-1.30 
Si%:      0.25 max 
S%:       0.12-0.20 
P%:       0.06 max

EN8CM 
C%:      0.38-0.43 
Mn%:    0.90-1.30 
Si%:      0.25 max 
S%:       0.12-0.20 
P%:       0.06 max

EN8B 
C%:      0.35-0.40 
Mn%:    0.70-0.90 
Si%:      0.05-0.35 
S%:       0.06 max
P%:       0.06 max

EN8E 
C%:      0.35-0.40 
Mn%:    0.90-1.10 
Si%:      0.05-0.35 
S%:       0.06 max
P%:       0.06 max

EN8AM 
C%:      0.33-0.38 
Mn%:    0.90-1.30 
Si%:      0.25 max
S%:       0.12-0.20 
P%:       0.06 max

EN8DM 
C%:      0.40-0.45 
Mn%:    0.90-1.30 
Si%:      0.25 max 
S%:       0.12-0.20 
P%:       0.06 max

 EN8 Mechanical Properties

EN8 mechanical properties include ​tensile strength, yield strength, elongation and hardness. EN8 hardness ranges from 200 HB - 350 HB. EN8 tensile strength ranges from 450-1000 MPa and Yield Strength ranges from 330-800 MPa. Materials supplied are of premium quality supplied along with the material test certificate. The Types of Heat treatment can vary the mechanical properties of the material. Strength Test, Impact Test, Brinell Hardness Test, Fracture Toughness, and Durability Tests are the tests that are performed by us on EN8 Carbon Steel material.

​

Property                     Value


Tensile Strength       450-1000 MPa
Yield Strength         330-800 MPa
Elongation               7-21%

Hardness                 200-350 HB

​

EN8 Heat Treatments

  • Forging or hot rolling

  • Normalizing

  • Soft annealing 

  • Core hardening

  • Intermediate annealing

  • Case hardening

  • Tempering

  • Carburising

CARBON STEEL​

​

​

ALLOY STEEL

PRODUCTS

National Steel Industries is one of the biggest suppliers, exporters and Stockist of EN8 material.

Buy EN 8 at the best price from us which is tested for a variety of parameters and delivered with a material test certificate for complete quality assurance.

EN8 PRODUCTS

EN8 Round Bars | EN 8 Round Bars | National Steel Industries | Mumbai

EN8 Round Bar | EN 8 Carbon Steel Round Bar

Get Quote
EN8 Flat Bars | EN 8 Flat Bars | National Steel Industries | India | Mumbai

EN8 Flat Bars |EN 8 Carbon Steel Flat Bars

Get Quote
​EN8 Sheets and Plates| EN 8 Carbon Steel Sheets and Plates | National Steel Industries | India | Mumbai

EN8 Sheets and Plates| EN 8 Carbon Steel Sheets and Plates

Get Quote
EN8 Forged Round Bars | EN 8 Forged Alloy Steel Round Bars | National Steel Industries | India | Mumbai

EN8 Forged Round Bars | EN 8 Carbon Steel Round Bars

Get Quote
EN8 Square Bars | EN 8 Square Bars | National Steel Industries | India | Mumbai

EN8 Square Bars |EN 8 Carbon Steel Square Bars

Get Quote
EN8 Billets | EN 8 Billets | National Steel Industries | India | Mumbai

EN8 Billets| EN 8 Carbon Steel Billets

Get Quote
EN8 Bright Bars | EN 8 Alloy steel Bright Bars | National Steel Industries | India | Mumbai

EN8 Bright Round Bars | EN 8 Carbon Steel Bright Bars

Get Quote
EN8 Forged Blocks | EN 8 Forged Blocks| National Steel Industries | India | Mumbai

EN8 Forged Blocks| EN 8 Carbon Steel Forged Blocks

Get Quote
EN8 Angles, Channels and IBeams | EN 8 Carbon Steel Angles, Channels, I-Beams | National Steel Industries | India | Mumbai

EN8 Angles, Channels and IBeams | EN 8 Carbon Steel Angles, Channels, I-Beams 

Get Quote

LENGTHS OF ROUND BARS

Standard Length Bars are available in Sizes:
 

3m

6m

12m

The Length can be cut and customized as per the customer's requirements.

Sizes national Steel Industries India Mumbai.png

Round Bars Size

Product Name 

  
EN8 Hot Rolled Round Bars    

EN8 Cold Rolled and Cold Drawn Round bars

EN8 Peeled Round Bars    

EN8 Ground Round Bars    

EN8 Polished Round Bars    

EN8 Turned Round Bars    

EN8 Forged Bars    

EN8 Proof Machine Bars    

        Size


16mm dia to 250mm dia
4mm dia to 100mm dia
3mm dia to 65mm dia
5mm dia to 65mm dia
4mm dia to 65mm dia
10mm dia to 1200mm dia
30mm dia to 1500mm dia
30mm dia to 1500mm dia

Square Bars Size

Product Name 

​

EN8 Hot Rolled Square Bars    
EN8 Cold Drawn Square Bars

EN8 Peeled Square Bars   
EN8 Ground Square Bars    
EN8 Polished Square Bars    
EN8 Forged Square Bars    
EN8 Proof Machine Bars   

        Size

​

10mm Square to 200mm Square
10mm Square to 80mm Square
5mm Square to 80mm Square
5mm Square to 80mm Square
5mm Square to 50mm Square
30mm Square to 1500mm Square
30mm Square to 1500mm Square

EN8 APPLICATION

Hardness is a requirement of EN8 for high-end machine components. Chemicals and petroleum companies use EN8 widely. The high carbon content of EN8 makes it very tensile. The processing of EN8 can be carried out at high temperatures. Also, EN8 is suitable for manufacturing machine parts such as screws, machine arms, pistons, shafts, and axles. Product types subjected to continuous wear and tear usually comply with EN8.

EN8 Round Bar Uses
EN8 Round Bar Uses
EN8 Round Bar Uses
EN8 Round Bar Uses
EN8 Round Bar Uses
EN8 Round Bar Uses

We also Provide

  • EN8 high tensile Bright bars | High Yield Strength Bars | Hi-Yield Bars| High Tensile strength Bars | Good Quality​

  • EN8 Supplier and exporter

  • EN 8 Hot Rolled Round bars

  • EN8 Lowest Price in India

  • EN 8 carbon steel Bright bars

  • Special Steel EN8 Supplier

  • Buy EN8 material near me

  • carbon steel EN8 round bar

  • EN8 Forged steel Round bar

  • EN8 Round bar Dealers

  • Cold Drawn EN8 Round bar

  • Stockiest of EN8 Round bar

  • Dealers of EN8 Steel Round rods, Flat bars, Rectangular bars, Hex bars, Pipes, Sheets

  • Mild Steel EN8

  • carbon steel EN8 hex bar

  • Mild Steel EN8 Rods

  • carbon steel EN8 ingot

  • EN8 steel rods

  • EN8 rectangle bars

  • EN8 carbon steel bright bar

  • carbon steel EN8 forged bar supplier

  • EN8 carbon steel square bars

  • EN8 carbon steel rods price list

  • carbon steel EN8 round bar specification

  • EN8 carbon flat bars price

  • carbon steel EN8 cold finish round bar

  • EN8 sheets supplier

  • EN8 plate dealers

  • EN 8 carbon steel polish bar exporter in Mumbai India

  • EN8 carbon steel rods mechanical properties

  • EN8 carbon steel round bars

  • EN8 Manufacturers

  • carbon steel EN8 hexagon price list

  • EN 8 biggest supplier in India

  • EN8 carbon steel rods

  • ​EN8 carbon steel rods stockiest in Mumbai

  • EN8 carbon square bar

  • carbon steel EN8 billet

  • carbon steel EN8 round bar

  • EN8 Mechanical properties

  • EN8 plate dealers in Mumbai, India

  • EN8 carbon black bar chemical composition

  • EN8 carbon steel rectangular bars

  • EN8 carbon black supplier in India

  • carbon steel EN8 square bars

  • carbon steel EN8 forging

  • EN8 carbon steel bars

  • EN8 Sheet metal providers.

  • EN8 carbon steel hexagonal bar exporter in India

  • carbon steel EN8 round bar

  • carbon steel EN8 cold drawn round bar

  • EN 8 material dealers

  • EN8 carbon steel polished bar supplier in Mumbai India

  • EN8 carbon steel round bars price list

  • EN8 carbon steel threaded bar exporter

  • Buy EN8 Round bar

  • EN8 carbon steel Suppliers

  • carbon steel EN8 bright bar manufacturers in India

  • carbon steel EN8 rectangular bars manufacturers in India

  • EN8 carbon steel flat bar weight chart

  • EN 8 material supplier in Mumbai

  • EN8 carbon steel bar exporter

  • EN8 Round bar supplier

Wave

EN8
 Suppliers of En 8 Carbon Steel 

This material has a high hardness range as well as a high tensile strength, which is able to accept stress generated by normal operation. EN8 is very strong and wear-resistant, which makes it a good fit for industrial purposes. A very high hardness characterizes EN8 steel. Round and forged bars, bright bars, and other sizes are available from National Steel Industries. En 8 sizes are available from 20mm up to 190mm in diameter. Providing EN8 round bars to our customers for over 20 years. Our company manufactures and exports EN8 grade steel bars, and we have gained the trust of clients by offering quality products. We offer bright and hot rolled EN 8 round bars.

EN8 can be normalized, tempered, and quenched, among other heat treatments. Chains, screws, gears, arms, rollers, and other machine parts are manufactured using it. Shipbuilding, aircraft industry, mechanical engineering, oil industry, iron and steel industry, etc use EN 8. 

National Steel Industries is one of the leading suppliers of EN8 steel. We offer EN 8 round bars and EN 8 sheets with a material testing certificate that ensures complete quality assurance. 

​EN8  Heat Treatment Alloy Steel | EN 8 Round Bars | EN26 Bright Bars | EN 26 Forged Round Bars | EN26 Blocks | EN 26 Billets

National Steel Industries is one of the biggest suppliers, exporters and Stockists of EN8 material at the best price. 

National Steel Industries provides the best price and best quality for EN8 round bars.

FAQ ON EN8 CARBON STEEL

Q) What is the difference between EN8 & EN24?
Ans: EN8 is carbon steel whereas EN24 is alloy steel. Elements like Nickel, Chromium and Molybdenum are absent in EN8 and are present in EN24 Alloy Steel. 

​

Q) What is EN8 material?
Ans: EN8 carbon steel material properties are its high hardness ranges and high tensile strength, which accept stress generated by normal operation. EN8 is very strong and wear-resistant, which makes it a good fit for industrial purposes. 

​

Q) Is EN8 mild steel?
Ans: No EN8 is not mild steel. In the chemical composition of EN8, there is a high carbon content than Mild Steel. Mild steel is less hard than EN8 carbon steel. EN8 material also has very good machinability.

​

At Your service in

We are the leading supplier of EN8 round bar supplier in  Mumbai,  Delhi,  Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Jaipur, Lucknow, Kanpur, Najpur, Indore, Thane, Bhopal, Visakhapatnam, Pimpri, Chinchwad, Patna, Vadodara, Ghaziabad, Ludhiana, Agra, Nashik, Ranchi, Faridabad, Meerut, Rajkot, Kalyan, Dombivli, Vasai, Virar, Varanasi, Aurangabad, Dhanbad, Amritsar, Navi Mumbai, Allahabad, Howrah, Gwalior, Jabalpur, Coimbatore, Vijayawada, Jodhpur, Madurai, Raipur, Kota, Chandigarh, Guwahati, Solapur, Hubli, Dharwad, Mysore, Tiruchirappalli, Gurgaon, Bhubaneswar, Salem, Warangal, Mira, Bhayandar, Jalgaon, Guntur, Thiruvananthapuram, Bhiwandi, Saharanpur, Amravati, Noida, Jamshedpur, Bhilai, Cuttack, Firozabad, Kochi, NelloreBhavnagar, Dehradun, Durgapur, Asansol, Rourkela, Nanded, Kolhapur, Ajmer, Akola, Gulbarga, Jamnagar, Ujjain, Loni, Siliguri, Jhansi, Ulhasnagar, Sangli, Miraj, Kupwad, Mangalore, Kurnooi, Ambattur, Rajahmundry, Tirunelveli, Malegaon, Gaya, Udaipur, Kakinada, Muzaffarnagar, Bhatpara, Panihati, Latur, Dhule, Rohtak, Sagar, Korba, Bhilwara, Berhampur, Muzaffarpur, Ahmednagar, Kollam, Avadi, Kadapa, Anantapuram, Kamarhati, Bilaspur, Sambalpur, Shahjahanpur, Satara, Bijapur, Rampur, Shimoga, Chandrapur, Junagadh, Thrissur, Alwar, Bardhaman, Kulti, Nizamabad, Parbhani, Tumkur, Khammam, Uzhavarkarai, Bihar, Panipat, Darbhanga, Bally, Aizawl, Dewas, Ichalkaranji, Karnal, Bathinda, Jalna, Eluru, Barasat, Kirari, SulemanNagar, Purnia, Satna, Mau, Sonipat, Farrukhabad, Durg, Imphal, Ratlam, Hapur, Arrah, Anantapur, Karimnagar, Etawah, Ambarnath, Bharatpur, Begusarai, NewDelhi, Gandhidham, Baranagar, Tiruvottiyur, Pondicherry, Katni, Secunderabad, Naihati, Yamunanagar, Bidhannagar, Pallavaram, Bidar, Munger, Panchkula, Burhanpur, RaurkelaIndustrialTownship, Kharagpur, Dindigul, Gandhinagar, Hospet, NangloiJat, Malda, Ongole, Deoghar, Chapra, Haldia, Khandwa, Nandyal, Morena, Amroha, Anand, Bhind, Bhalswa, Jahangir, Pur, Madhy, amgram, Bhiwani, Berhampore, Ambala, Morbi, Fatehpur, Raebareli, , Khora, , Ghaziabad, Chittoor, Bhusawal, Orai, Vellore, Mehsana, Raiganj, Sirsa, Danapur, Serampore, Sultan, Pur, Majra, Guna, Jaunpur, Panvel, Shivpuri, Surendranagar, Dudhrej, Unnao, Chinsurah, Alappuzha, Kottayam, Machilipatnam, Shimla, Adoni, Udupi, Katihar, Proddatur, Mahbubnagar, Saharsa, Dibrugarh, Jorhat, Hazaribagh, Hindupur, Nagaon, Sasaram, Hajipur.

We  can supply EN8 round bar supplier in the following countries

​​

  • USA

  • Turkey

  • Saudi Arabia

  • Qatar

  • UAE

  • Kenya

  • Singapore

  • South Korea

  • Austria

  • Belgium

  • Czechia

  • Denmark

  • Estonia

  • Finland

  • France

  • Germany

  • Greece

  • Hungary

  • Iceland

  • Italy

  • Chile

  • Latvia

  • Switzerland

  • Ukraine

  • United Kingdom

  • Canada

  • Bahrain

  • Israel

  • Thailand

  • Iraq

  • Niger

  • Libya

  • Algeria

  • Honduras

  • Armenia

  • Azerbaijan

  • Belarus

  • Georgia

  • Iceland

  • Liechtenstein

  • Moldova

  • Norway

  • San Marino

  • Guatemala 

  • Russia

  • Liechtenstein

  • Lithuania

  • Netherlands

  • Norway

  • Poland

  • Portugal

  • Slovakia

  • Brazil

  • Slovenia

  • Spain

  • Sweden

  • Switzerland

  • Andorra

  • Laos

  • Cambodia

  • Myanmar

  • Vietnam

  • Argentina

  • Uruguay

  • Paraguay

  • Mexico

Products of EN8

EN8 ROUND BARS  |  EN8 PIPES AND TUBES  |  EN8 FORGED ROUND BAR  |  EN8 BRIGHT BARS  |  EN8 ANGLES  |  EN8 BILLETS  |  EN8 CHANNELS  |  EN8 FLAT BARS  |  EN8 SQUARE BARS  |  EN8 FORGED BLOCKS  |  EN8 BILLETS  |  EN8 SHEETS AND PLATES  |  EN8 IBEAM  |  EN8 I-BEAM  |  EN 8 ROUND BARS  |  EN 8 PIPES AND TUBES  |  EN 8 FORGED ROUND BAR  |  EN 8 BRIGHT BARS  |  EN 8 ANGLES  |  EN 8 BILLETS  |  EN 8 CHANNELS  |  EN 8 FLAT BARS  |  EN 8 SQUARE BARS  |  EN 8 FORGED BLOCKS  |  EN 8 BILLETS  |  EN 8 SHEETS AND PLATES  |  EN 8 IBEAM  |  EN 8 I-BEAM  |  EN8A ROUND BARS  |  EN8A PIPES AND TUBES  |  EN8A FORGED ROUND BAR  |  EN8A BRIGHT BARS  |  EN8A ANGLES  |  EN8A BILLETS  |  EN8A CHANNELS  |  EN8A FLAT BARS  |  EN8A SQUARE BARS  |  EN8A FORGED BLOCKS  |  EN8A BILLETS  |  EN8A SHEETS AND PLATES  |  EN8A IBEAM  |  EN8A I-BEAM  |  EN8B ROUND BARS  |  EN8B PIPES AND TUBES  |  EN8B FORGED ROUND BAR  |  EN8B BRIGHT BARS  |  EN8B ANGLES  |  EN8B BILLETS  |  EN8B CHANNELS  |  EN8B FLAT BARS  |  EN8B SQUARE BARS  |  EN8B FORGED BLOCKS  |  EN8B BILLETS  |  EN8B SHEETS AND PLATES  |  EN8B IBEAM  |  EN8B I-BEAM  |  EN8C ROUND BARS  |  EN8C PIPES AND TUBES  |  EN8C FORGED ROUND BAR  |  EN8C BRIGHT BARS  |  EN8C ANGLES  |  EN8C BILLETS  |  EN8C CHANNELS  |  EN8C FLAT BARS  |  EN8C SQUARE BARS  |  EN8C FORGED BLOCKS  |  EN8C BILLETS  |  EN8C SHEETS AND PLATES  |  EN8C IBEAM  |  EN8C I-BEAM  |  EN8D ROUND BARS  |  EN8D PIPES AND TUBES  |  EN8D FORGED ROUND BAR  |  EN8D BRIGHT BARS  |  EN8D ANGLES  |  EN8D BILLETS  |  EN8D CHANNELS  |  EN8D FLAT BARS  |  EN8D SQUARE BARS  |  EN8D FORGED BLOCKS  |  EN8D BILLETS  |  EN8D SHEETS AND PLATES  |  EN8D IBEAM  |  EN8D I-BEAM  |  EN8E ROUND BARS  |  EN8E PIPES AND TUBES  |  EN8E FORGED ROUND BAR  |  EN8E BRIGHT BARS  |  EN8E ANGLES  |  EN8E BILLETS  |  EN8E CHANNELS  |  EN8E FLAT BARS  |  EN8E SQUARE BARS  |  EN8E FORGED BLOCKS  |  EN8E BILLETS  |  EN8E SHEETS AND PLATES  |  EN8E IBEAM  |  EN8E I-BEAM  |  EN8K ROUND BARS  |  EN8K PIPES AND TUBES  |  EN8K FORGED ROUND BAR  |  EN8K BRIGHT BARS  |  EN8K ANGLES  |  EN8K BILLETS  |  EN8K CHANNELS  |  EN8K FLAT BARS  |  EN8K SQUARE BARS  |  EN8K FORGED BLOCKS  |  EN8K BILLETS  |  EN8K SHEETS AND PLATES  |  EN8K IBEAM  |  EN8K I-BEAM  |  EN8M ROUND BARS  |  EN8M PIPES AND TUBES  |  EN8M FORGED ROUND BAR  |  EN8M BRIGHT BARS  |  EN8M ANGLES  |  EN8M BILLETS  |  EN8M CHANNELS  |  EN8M FLAT BARS  |  EN8M SQUARE BARS  |  EN8M FORGED BLOCKS  |  EN8M BILLETS  |  EN8M SHEETS AND PLATES  |  EN8M IBEAM  |  EN8M I-BEAM  |  EN8AM ROUND BARS  |  EN8AM PIPES AND TUBES  |  EN8AM FORGED ROUND BAR  |  EN8AM BRIGHT BARS  |  EN8AM ANGLES  |  EN8AM BILLETS  |  EN8AM CHANNELS  |  EN8AM FLAT BARS  |  EN8AM SQUARE BARS  |  EN8AM FORGED BLOCKS  |  EN8AM BILLETS  |  EN8AM SHEETS AND PLATES  |  EN8AM IBEAM  |  EN8AM I-BEAM  |  EN8BM ROUND BARS  |  EN8BM PIPES AND TUBES  |  EN8BM FORGED ROUND BAR  |  EN8BM BRIGHT BARS  |  EN8BM ANGLES  |  EN8BM BILLETS  |  EN8BM CHANNELS  |  EN8BM FLAT BARS  |  EN8BM SQUARE BARS  |  EN8BM FORGED BLOCKS  |  EN8BM BILLETS  |  EN8BM SHEETS AND PLATES  |  EN8BM IBEAM  |  EN8BM I-BEAM  |  EN8CM ROUND BARS  |  EN8CM PIPES AND TUBES  |  EN8CM FORGED ROUND BAR  |  EN8CM BRIGHT BARS  |  EN8CM ANGLES  |  EN8CM BILLETS  |  EN8CM CHANNELS  |  EN8CM FLAT BARS  |  EN8CM SQUARE BARS  |  EN8CM FORGED BLOCKS  |  EN8CM BILLETS  |  EN8CM SHEETS AND PLATES  |  EN8CM IBEAM  |  EN8CM I-BEAM  |  EN8DM ROUND BARS  |  EN8DM PIPES AND TUBES  |  EN8DM FORGED ROUND BAR  |  EN8DM BRIGHT BARS  |  EN8DM ANGLES  |  EN8DM BILLETS  |  EN8DM CHANNELS  |  EN8DM FLAT BARS  |  EN8DM SQUARE BARS  |  EN8DM FORGED BLOCKS  |  EN8DM BILLETS  |  EN8DM SHEETS AND PLATES  |  EN8DM IBEAM  |  EN8DM I-BEAM  |
 

bottom of page