EN30B
Heat Treatment Alloy Steel | EN 30B Round Bars | EN30B Bright Bars |
EN 30B Forged Round Bars | EN30B Blocks | EN 30B Billets
EN30B material properties are high hardness. Due to EN30B's high tensile strength and wear resistance, It is used for industrial purposes. EN30B hardness is extreme. National Steel Industries provides EN30B round bars, forged bars, bright bars and other sizes of premium quality. Ready stock material of EN 30B in sizes 20mm to 190mm dia. Round bar supplier of EN30B for over two decades. We are one of the most trusted manufacturer and exporter of EN30B grade steel Bars. We offer EN 30B round bars in hot rolled and Bright condition.
Heat Treatments such as normalizing, tempering, quenching, etc can be applied to EN30B. It is used to make chains, screws, gears, arms, rollers, and other machine parts. EN 30B applications are in the fields of Shipbuilding, Aircraft Industry, Mechanical Engineering, Oil Industry, Iron and Steel Industry, etc.
​
National Steel Industries is the most prominent supplier of EN30B steel. Buy good quality EN30B round bar and EN 30B sheets from us which are tested for a variety of parameters and delivered with a material test certificate for complete quality assurance.
​
EN30B Chemical Composition
The Chemical Composition of EN30B contains a low carbon content of 0.26 - 0.34 %. The material has an Mn content of 0.5 - 0.6 % which is also relatively low. The contents of P is reduced to 0.05% and S is reduced to 0.05 % max as excess content of P and S can damage the quality of steel and can cause the alloys steel to break at low stresses. There is a high Chromium content of 1.1-1.4 % which adds additional yield and tensile on heat treatment. The high Nickel content of 3.90%-4.30% is present which imparts a ductile core and high heat treatment temperature capabilities.
​
Chemical Composition of EN30B
​
C%: 0.26 - 0.34
Si%: 0.10 - 0.35
Mn%: 0.40 - 0.60
Ni%: 3.90 - 4.30
Cr%: 1.10 - 1.40
Mo%: 0.20 - 0.35
S%: 0.05 max
P%: 0.05 max
EN30B Mechanical Properties
Compared to other grades of steel, EN30B steel has high tensile strength. The EN30B is hard and finds application in hard machine parts. It has good ductility, extreme toughness, and good wear resistance in quenched and tempered conditions.
​
Property Value
Tensile Strength 700-1500 MPa
Yield Strength 850-1000 MPa
Elongation 7-12%
Hardness 250-400 HB
​
EN30B Heat Treatments
-
Forging or hot rolling
-
Normalizing
-
Soft annealing
-
Core hardening
-
Intermediate annealing
-
Case hardening
-
Tempering
-
Carburising