EN27
En 27 Alloy Steel | Heat Treated bars of En27 | EN 27 Round Bar supplier | EN27 Bright Bars | EN27 Forged Round Bar Suppliers | EN 27 Blocks | EN 27 Billets |
EN27 steel properties are high tensile and hardness. It is used by Aerospace Industry, Shipbuilding Industry, Railway Industry, and Automobile Industry to make gears, shafts, arms, rollers, etc. National Steel Industries is one of the prominent suppliers of EN27 round bars in hot rolled, forged or cold forged condition. EN27 is supplied in quenched, annealed, normalized or any other condition as required by our customers.
National Steel Industries is also one of the world's most reliable exporters of EN 27 Alloy Steel Bright Bars. EN27 round bars are also offered in hard condition. EN27 steel rods and bars are kept in ready stock. Engineering steel En27 steel rods and bars are also offered in billets for the forging of en27 circles. EN27 round bars and flat bars standard sizes are available in ready stock.
National Steel Industries is a round bar supplier of En27 steel in Mumbai and other cities. Buy good quality EN27 round bar and EN 27 bright bars from us which are tested for a variety of parameters and delivered with a material test certificate for complete quality assurance.
Below mentioned are EN27 Specifications, EN27 chemical composition, and EN27 mechanical properties.
EN27 Chemical Composition
The Chemical Composition of EN27 contains a carbon content of 0.25 - 0.35 %. The material has an Mn content of 0.70 % max. The contents of P are reduced to 0.05 % and S is reduced to 0.05 % max as excess content of P and S can damage the quality of steel and can cause the alloys steel to break at low stresses. There is a high Chromium content of 0.5-1.30 % which adds additional yield and tensile on heat treatment. The high Nickel content of 3.00-3.75 % is present which imparts a ductile core and high heat treatment temperature capabilities.
​
Chemical Composition of EN27
C%: 0.25-0.35
Mn%: 0.70 max
Si%: 0.10-0.35
Cr%: 0.50-1.30
Ni%: 3.00-3.75
Mo%: 0.20-0.65
S%: 0.05 max
P%: 0.05 max
EN27 Mechanical Properties
Compared to other grades of steel, EN27 steel has high tensile strength. The EN27 is hard and finds application in hard machine parts. It has good ductility, extreme toughness, and good wear resistance in quenched and tempered conditions.
​
Property Value
Tensile Strength 450-1500 MPa
Yield Strength 330-1000 MPa
Elongation 7-21%
Hardness 200-400 HB
​
EN27 Heat Treatments
-
Forging or hot rolling
-
Normalizing
-
Soft annealing
-
Core hardening
-
Intermediate annealing
-
Case hardening
-
Tempering
-
Carburising