17CrNiMo6
Heat Treatment Alloy Steel | 17CrNiMo6 Round Bars | 17CrNiMo6 Bright Bars |
17CrNiMo6 Forged Round Bars | 17CrNiMo6 Round Bar Supplier | 17CrNiMo6 Manufacturer | 17CrNiMo6 Exporter | 17CrNiMo6 Stockist
What is 17CrNiMo6 Alloy Steel?
17CrNiMo6 material properties are high tensile strength, hardness and wear and tear resistance. 17CrNiMo6 hardness is extreme. National Steel Industries provides 17CrNiMo6 round bars, forged bars, bright bars and other sizes of premium quality. Ready stock material of 17CrNiMo6 in sizes 20mm to 190mm dia. Round bar supplier of 17CrNiMo6 for over two decades. We are one of the most trusted manufacturer and exporter of 17CrNiMo6 grade steel Bars. We offer 17CrNiMo6 round bars in hot rolled and Bright condition.
Heat Treatments such as normalizing, tempering, quenching, etc can be applied to 17CrNiMo6. It is used to make chains, screws, gears, arms, rollers, and other machine parts.
​
National Steel Industries is the most prominent supplier of 17CrNiMo6 steel. Buy good quality 17CrNiMo6 round bar and 17CrNiMo6 sheets from us which are tested for a variety of parameters and delivered with a material test certificate for complete quality assurance.
​
17CrNiMo6 Chemical Composition
The Chemical Composition of 17CrNiMo6 contains a low level of carbon content of 0.15 - 0.21 %. The material has an Mn content of 0.5 - 0.9 % which imparts hardness to the material. The contents of P is reduced to 0.025% and S is reduced to 0.015 % max as excess content of P and S can damage the quality of steel and can cause the alloys steel to break at low stresses. There is a high Chromium content of 1.5-1.8 % which adds additional yield and tensile on heat treatment.
​
Chemical Composition of 17CrNiMo6
​
C%: 0.15-0.21
Si%: 0.40 max
Mn%: 0.50-0.90
P%: 0.025 max
S%: 0.015 max
Cr%: 1.50-1.80
Ni%: 1.40-1.70
Mo%: 0.25-0.35
Al%: 0.05 max
Cu%: 0.30 max
17CrNiMo6 Mechanical Properties
Compared to other grades of steel, 17CrNiMo6 steel has high tensile strength. The 17CrNiMo6 is hard and finds application in hard machine parts. It has good ductility, extreme toughness, and good wear resistance in quenched and tempered conditions.
​
Property Value
Tensile Strength 520-1200 MPa
Yield Strength 350-600MPa
Elongation 11-26%
Hardness 180-350 HB
​
17CrNiMo6 Heat Treatments
-
Forging or hot rolling
-
Normalizing
-
Soft annealing
-
Core hardening
-
Intermediate annealing
-
Case hardening
-
Tempering
-
Carburising